Your quote sheet comes as pre-spaced roll of letters made up of 3 layers:
- Top layer = transfer sticking paper (through which you can see the letters)
- Middle layer = the letters themselves
- Bottom layer = white, shiny backing paper
Easy steps to apply your letters:
- First, rub over your lettering to ensure it is sticking firmly to the transfer paper.
- Then, choose your desired wall location and place your lettering on your wall exactly the way it comes. Use small pieces of masking tape to hold it into place.
- Then measure your letters to either the ceiling or floor, whichever is easier to ensure your phrase is straight. Make sure you measure from the letters themselves, not the white paper your letters come on as this may not be straight. Choose letters at the beginning, middle, and end of your phrase that are similar to each other and are the same level height at the bottoms as each other. (none drop down further than the other).
- Measure the distance between the bottoms of these letters and the floor or ceiling to ensure the same distance all along the phrase.
- Adjust straightness of phrase as needed by pulling up masking tape, adjusting and re-taping in place.
- Once phrase is straight, place a long piece of masking tape along the entire top of your phrase.
- Flip up the lettering and peel the backing paper off. The masking tape is now working as a hinge.
- Then flip the lettering down, pulling down into place with no wrinkles.
- rub over the lettering (with the squeegie) to securely adhere them to your wall. Work from the top center down and out.
You’re Done!